Car Dealers Spill Their Detailing Secrets

Car Dealers Spill Their Detailing Secrets

Car dealers had a crew of detailers in their team who did a clean job! You can hire someone to detail your car after you buy it, but doing it yourself can save you hundreds of dollars! Do you want to know their secrets? All you need to do is set aside a few hours and gather some basic tools, such as vehicle washing detergent, some buckets, a glove cleans, wax, brush, brush coffee, microfiber towels, rubber gloves, and vacuum. You also need leather conditioner if you have leather seats, and a clay bar system if there are tar, paint, or spark a bug in your car. Keep reading for tips pro.

Remove Everything

The first thing you should do is take everything out of the car. Remove loose change, mats, ice scraper, and anything in the trunk. Make sure the vehicle is completely empty.

Work on the interior

- Dust dash and wherever you see either collect debris with a microfiber towel.

- Clean spots and spills with mild soap and water. Use cleaners at all the pieces of plastic and rubber. Be sure to check inside the door of the clock and around the trunk lid.

- Use the brush to clean the coffee grating on the heater vent.

- The skin clean with a cooling solution.

- Brush the carpet to loosen crumbs and straighten the fibers. If the pet hair is a problem, wearing latex gloves and a feathered rub; Static will take the hair. Do not forget about the floor mats. Soon you will be ready to vacuum. Be careful to leave headliner, because smooth glue that can be easily separated. Car dealers say that the hanged headliner always looks worse than dirty.

Working on Exterior

- Start by washing the vehicle with two buckets. First, dip gloves in clean water and rinse your car, and then use a second, foaming bucket to wash your car. This prevents you from rubbing dirt into the vehicle. Dry with a clean microfiber towel.

- If there is a spark surface contaminants like bugs, tar, or paint, you will need to use a clay bar system. Follow the instructions on the packaging. Test the paint surface afterwards by placing a plastic shopping bag in your hand and slide on the surface. Any remaining lumps will be strengthened and easier to find.

- Next, work on the trim. Use sealant to trim to help protect it from the candle. Then get out buffer. A common mistake that people make use buffer after they have applied the wax. Buffers should be used to apply the wax, do not delete it. Once the wax is dry, use a clean microfiber towel to buff the wax off paint.

Do not forget

Car dealer to check this area often overlooked when performing inspections trade-ins. Remember to clean the wheels and rods required. Also, do not forget to check under the hood. Taking your car to a local car wash and carefully spray soapy water with a medium-pressure hose at the dirty and greasy. Hose can then be treated with cleaners. Battery connections can be cleaned with a toothbrush and a mixture of water and baking soda.

It may take some time and much effort, but this simple trick and investment in good quality supplies can save hundreds of dollars on car detailing every year.